call us 1800 024 407

DX-23 Horizontal Autoclave-front

Systec Horizontal Benchtop Autoclave,23L,DX-23

Your Price (excluding GST)

$15,257.00

Call for Delivery Time

Code 1923
Size 23 Litres
Brand Systec
Made In Germany
Pack Size Single Item
Colour Appliance White

Payment Options

 

Product Overview

23L Benchtop Autoclave - DX Series


Built-in Steam Generator, 25 Cycle Programmes


The DX series of Systec Horizontal Autoclaves are the premium models in our range of autoclaves. They specifically developed for precision sterilization applications in the laboratory; processes become easier, safer, & more precise

Features

Un-beatable Autoclave features!

This autoclave has a separate steam generator, which has many advantages, including:

  • No heating elements and no reservoir for dirty water in the autoclave chamber
  • In conjunction with the stand-by pre-heating option, only 10 min. heating time to 121 °C with an empty chamber
  • Improved removal of air from the empty autoclave chamber via pulsed heating (rapid attainment of optimal steam atmosphere, even without a vacuum)
  • Accuracy better than ± 0.3 K with empty autoclave chamber
  • Quicker cooling as neither hot water in the autoclave chamber nor the separate steam generator need be cooled
  • On cooling, steam is immediately available for the next sterilization run

The features listed below are included on the DX-23

  • From the sterilization chamber separated steam generator integrated into the housing
  • Automatic door closure with safety-lock system
  • Sterilization temperature up to 140 °C, Steam pressure up to 4 bar
  • Thermal autoclave door lock, controlled by pressure and medium temperature according to Pressure Vessel Regulations
  • Fully-automatic autoclave with microprocessor control
  • Number of sterilization programs 25
  • Pre-selectable sterilization parameters and automatic program sequence
  • Password secured access rights for parameterization and for further security relevant interventions
  • Pre-programmable automatic autoclave door opening at the end of a program
  • Flexible PT-100 temperature sensor for reference vessel
  • Medium temperature-controlled sterilization time
  • Additional PT-100 temperature sensor in the condense exhaust
  • Electronic pressure sensor for pressure and temperature control
  • Validation port
  • RS 232 and RS 485 for external data transfer (network-compatible) Internal memory for documentation of up to 500 sterilization cycles (16MB)
  • Integrated SD-Card-Slot inclusive SD-Card (256MB) for documentation of up to
  • Prepared for subsequent printer installation
  • Start by clock / timer for programmed start time
  • Steam exhaust condensation, water cooled, thermostatic controlled
  • “Auto fill“- Automatic de-mineralized water feed for steam generation
  • Special program for waste sterilization with pulsed heat-up for more efficient air exhaust
  • Temperature holding function after the end of program for liquids
  • Special program for Durham-Tubes
  • Pressure vessel made out of Titanium-stabilized stainless steel 1.4571 (V4A, AISI 316 Ti), electro polished
  • Thermal insulation out of Hanno-Tect, no risk of particle dissociation
  • Housing and basic frame construction out of corrosion resistant stainless steel
  • Common collector connection for all outlets
  • Safety valve for pressure release when exceeding the limit value
  • Low water protection
  • Excess temperature protection
  • Prepared for subsequent rapid cooling installation
  • Prepared for subsequent installation of vacuum system
  • Prepared for subsequent drying installation

OPTIONAL:

  • Extension of temperature and pressure to 150 °C / 5bar (only for sizes Systec D-65 — D-150)
  • Rapid cooling
  • Pre- and post-vacuum
  • Air exhaust filtration
  • Drying ‘Superdry’ (only in conjunction with an optional vacuum system)
  • PC-Software for extensive documentation (network-compatible
  • Printer for autoclave documentation
Specifications

Systec DX-23

Chamber dimensions: diameter x depth in mm (260x 240)

Chamber volume in litres: total / nominal: (25/23)

External dimensions in mm: (W 555 x H 500 x D 650)

Heating power kW: .2.80

Electrical connections for Systec D-23: 220 – 240 V AC, 50/60 Hz, 16 A

Other voltages and single-phase operation available on request

Loading Capacity

Erlenmeyer flasks 

250ML

11

500ml

8

1000ml

3

2000ml

0

Schott-Duran Media flasks

250ml

18

500ml

10

1000ml

4

2000ml

0

Delivery & Services

The Systec DX-23 Autoclave requires installation and commissioning

Delivery usually 12-14 weeks from reciept of order

Services required include:

  • 240V power
  • RO feedwater
  • Tap water
  • Drainage
  • Compressed air (if rapid cooling or vacuum specified)
  • Preferably a sink nearby for cleaning
Additional info

Autoclave to make your job easier!

Autoclave Excellence...

The Systec Horizontal autoclave isspecifically developed for sterilization applications in the laboratory; processes become easier, safer, more precise, reproducible and validatable. For basic and advanced laboratory autoclave applications and media sterilization, and unlimited options for process optimization. 

This Autoclave represents a level of Quality, Innovation and Unique design that brings Systec to the front of the Autoclave Industry. Along with robust German design, Systec Autoclaves are known for their impeccable attention to detail and usability.

  • Does your autoclave meet current legal and best practice requirements?
  • Can you easily access service technicians and technical advice for your autoclave?
  • Have you had training on how to ge the best from your autoclave?
  • Do you want better results from your autoclave?

Would you like an Autoclave that gives Better Results...